POWERPRESS H -TYPE
Birson Forgings is Manufacturer and Supplier Of H Type Power Press, Power Press Machine, Power Press H Type, H Frame Power Press.
Blanking, cutting, piercing, trimming, drawing, reducing, stamping, punching, and bending are all common uses for power presses.
Our Power presses are capable of performing a wide range of pressing and shaping operations, allowing the user to choose the equipment that best suits his needs. The best press for the job may be determined by taking into account the purpose, the size of the produced items, the material to be used, and the needed output.
We create Power Presses with a steel constructed frame and the highest quality raw materials that have been proven for long life, efficiency, and durability. We also stress relieve all manufactured frames and season all castings according to industry standards.
BirsonForgings also deals C Type Power Press Machine, Power Press C Type, C Frame Power Press
Capacity from 30 to 500 Tons
Frame :- The Power Press Frame is fracture-proof all welded single piece construction made from fine tested steel with suitable cross ribbings. The steel constructed frame is stress relieved for having long life, high efficiency, utility and reliability. The advantages of steel construction :-
A) Higher modulus of elasticity
B) Higher strength
C) Due to (a) and (b), smaller cross-sections, hence rigid frame
D) Absorb the heavy work load
Clutch :- The clutch is of rolling key type. The clutch is rigid and well supported. The clutch is giving continuous strokes for mass production and have long operating times.
Crank Shaft :- Crank shaft is made from special alloy steel and is having large bearing surfaces for smooth running fitted in bronze bushes ,finished to proper tolerances are provided for long life.
Gears :- The gears produced by our production units are able to fulfil all the standards. We use the best quality of raw materials for these gears. The team which is accountable for introspecting the quality standard of the manufactured gears, is comprised of experts having pool of knowledge in this respective fields.
Flywheel :- Flywheel is made from high grade cast iron. The Fly wheel are characterized by the fact that the fly wheel connected to accelerated at the start of working stroke. The fly wheel provides a predetermined amount of energy to the job and used for storing and releasing adequate energy for the pressing operations, and properly balanced for smooth running.
Lubrication :- The Purpose of the lubrication is to provide a film to ease the movement of the material over the tool and to reduce wear and tear on the latter. The lubricant is often required to cool the tool in addition. The lubricant is applied by hand pump or Motorised pump.
Table & Ram :- Table and Ram are made of high grade heavy duty cast iron & properly seasoned. They are perfectly aligned, to each other to obtain high accuracy & precision press operation.
Motorised Lubrication Pump
Anti vibration mounts
Anti repeat Safety Device
Hand safety sensors
PLC controlled system
Slide Adjustable Spanner
Fly Wheel guard
Lubrication pump for all moving parts
Bronze metal bushes
Birson Forgings is Manufacturer and Exporter of Friction Screw Presses (Down Stroke) , Forging Screw Presses (Up-Stroke) , H-Frame Power Presses, C-Frame Power Presses, Cross Shaft Presses, Knuckle Joint Presses .