BIRSON FORGINGS PRESSES

Home / Presses

POWER PRESS  H - TYPE

These Power presses are mostly employed for blanking, cutting, piercing, trimming, drawing, reducing, stamping, punching & bending. Our Power presses cover the whole range of pressing and forming operations, and thus the customer is able to select the machine best suited to his requirements. The suitable press can be ascertained from a consideration of the purpose, the size of the production products, the material to be used and the required output. Power Presses what we are manufacture is of steel fabricated frame, using best raw materials that are tested for long life, efficiency and reliability. We also do stress relieving to all fabricated frames and follows standard practice of seasoning casting. These presses are provided with pedal operated rolling key clutch. We also manufacture the customized Power presses in order to meet exact requirement of our customers from 10 ton to 1000 tons cap.

BIRSON FORGINGS FORGING PRESS UP- STOKE

These screw presses are specially designed to make bolt head of any kinds of nuts, rivets, motor parts, axle half shaft, engine valve and nonferrous forgings. Vincent presses are screw presses with friction drive on which the forging blow takes place in an upward direction i.e. from bottom towards top. On machines employing the vincent principle the screw nut is positioned in the top cross head of a frame type ram. Thus ram being moved upwards in axial direction by rotation of longitudinally fixed screw. The bottom die of the forging tools is secured to the lower cross head of the ram while the top die is fitted to a fixed bridge which is the part of the machine frame be employing this design, the forging forces do not act on the machine frame but are sustained by the ram. Ejector is provided at lower part of the ram.

no%20bck_edited.png
manual-friction-screw-press-down-stroke-

These Friction Screw presses are preferred for hot forming (Forgings) and cold coining, Stamping, embossing, Sizing nonferrous metals. The press body is steel welded construction one piece box type design. After the welding the press body is glowed free from tension. The Screw is made of high quality alloy Steel and is heat treated to have great hardness at the same time great elasticity. Fly wheel screw presses machines of this type are characterized by the fact that fly wheel connected to accelerated at the start of working stroke, then braked to a standstill by the actual forming process. Thus the entire kinetic energy stored in the fly wheel released screw press have not kinetically fixed bottom dead center point in common with drop forging itself or by stops in the tool in turn, this results in advantage tool height adjustment is eliminated, forging accuracy is greater.

FRICTION SCREW PRESS (DOWN-STROKE)
POWERPRESS C -TYPE

Our Power presses covers the whole range of pressing and forming operations. The press frame is made in one single piece weld body and is shaped like a 'C'. These presses are mostly employed for blanking, piercing, stamping, bending trimming and clinching operations.

Power Presses what we are manufacture is of steel fabricated frame, using best raw materials that are tested for long life, efficiency and reliability. We also do stress relieving to all fabricated frames and follows standard practice of seasoning casting. These presses are provided with pedal operated rolling key clutch.

1-500x500-500x500_edited_edited_edited.png