top of page
"Unleash the Possibilities: Explore at Birson Forgings"
Home / Blog
Search


Cross Shaft vs Single Crank Power Press: Key Differences
Cross shaft vs single crank power press: drive layout, ram tilt, die width, tonnage range, automation and cost compared, and which to choose for your parts.
Jagjit Birdi
Jul 13 min read


7 Power Press Parts That Decide Machine Life and Accuracy
The 7 power press parts that decide machine life and accuracy: frame, crankshaft, clutch and brake, flywheel, screw and nut, slide and bolster, and controls.
Jagjit Birdi
Jul 13 min read


Down-Stroke vs Up-Stroke Forging Screw Press Explained
Down-stroke vs up-stroke (Vincent) forging screw press compared: drive, die access, energy, tonnage and which suits your forgings. From a Ludhiana maker.
Jagjit Birdi
Jul 16 min read


C-Frame vs H-Frame Power Press: Which One Fits Your Shop?
C frame vs H frame power press: rigidity, deflection, die access, tonnage range and cost compared, plus when to switch to an H frame. From a Ludhiana maker.
Jagjit Birdi
Jul 14 min read


How to Choose a Friction Screw Press for Hot Forging
Choosing a friction screw press for hot forging: size tonnage to the part, pick down-stroke or up-stroke, check the frame, screw and nut, and verify the maker.
Jagjit Birdi
Jul 13 min read
bottom of page
